How to Make Vigorous Green Wire and Bead Earrings with 3 Steps - Tutorial

This wire and bead earring is so easy to make and I’m extremely obsessed with it. Plus to continue the bright colors of summer, I made the earrings with a vivid green and gold color combination. We hope that you’ll love this beaded earring tutorial and would like to do this piece at home.

Supplies needed in the beaded earring tutorial:

6mm Oval Acrylic Bead

10mm Flat Round Acrylic Bead

2mm Round Seed Bead

0.5mm Brass Wire

2mm Aluminum Wire

Earring Hook

Side Cutting Pliers

Round Nose Pliers

Flat Nose Pliers

How to make wire and bead earrings?

Step1: Make the center beaded wire part

1st, cut two lengths of 2mm aluminum wire, each be 10cm long;

2nd, loop the two ends of wires as picture shows;

3rd, bent the wires into a slight radian with thumbs;



4th, cut a length of 0.5mm brass wire, measuring about 50~60cm long;

5th; anchor the brass wire next to the loop of aluminum wire by wrapping 3~5 time;

6th, string one bead and fasten by two coils;

7th, take the brass wire to other side of aluminum wire, then string another bead and secure by coils;

8th, repeat the processes 6 and 7 until adorn both sides of the aluminum wire with beads;

9th, secure the ends as starting.

Step2: Make the flat round dangles

1st, cut a length of 0.5mm brass wire, measuring about 20cm long;

2nd, fold the 1/3 of the wire, slide one 2mm seed bead down to the folded location;

3rd, string the flat round bead on both wire ends;

4th, create a wrapped bail;

5th, repeat the processes 1~4 for another dangle.

Step3: Group the separate elements

1st, lay the three basic components on a flat;

2nd, open the loops on two ends of aluminum wire;

3rd, attach the dangle and earring hook respectively.

Do the same to the other earring and congratulations!

Now the above are all about today’s beaded earring tutorial and you can go make the wire and bead earrings for yourself and the closest friends and share the detailed photos with us! We’d love to see it!