• Add to Wish List (36 Likes)

    • Color:

    • Package Size:

    • Specification:
      Size 225x43.5x46.5mm
      Material Plastic
      Color Black
      Usage Heat Guns
      Package Size 1 pc per package

Sorry, the item is temporarily removed from PandaHall because it's out of stock.
If you have any questions, please feel free to contact us.

120V Mini Heat Gun, Dual Modes Temperature Adjustable Electric Heat Gun, for DIY Shrink Wrap Drying Paint Embossing, Type A Plug(US Plug), Black

Size: about 225mm long, 43.5mm wide, 46.5mm thick; current lead: about 890x7x3.5mm; holder: about 50mm wide; packing: about 30x8.4x5.2cm.

Voltage: 120V, Power: 300W; Warm Tips: The temp of the nozzle could reach to 200°C in seconds.

Suitable for: This excellent compact heat gun can be used for heating shrinkable film, embossed powder, rubber stamp.

● The power plug, known as Type A plugs, ungrounded with 2 flat parallel pins, almost always was operated on 100-127 V and rated at 15A, mainly used in the USA, Japan, Cannada, Mexico. It can fit into Type A and Type B sockets. This Type A plug can be used on small devices that do not require a ground connection.

Priced per 1 pc

Please Note: Slight deviations in colors is allowed due to different display device.

Featured Reviews

Customer Questions

Confirm

close

Please Note

OK
Country/Region:

Search by Image

·Search pandahall with an image instead of text. Try dragging an image here.

  • 1. The image must be in one of the following formats: .jpg, .png, .jpeg, .bmp, .gif, .webp, .tiff, .ppm
    2. The size of the image should be less than 5M!
    3. The image length and width must be greater than or equal 200 pixels and smaller than or equal to 1024pixes.
  • 1. The image must be in one of the following formats: .jpg, .png, .jpeg, .bmp, .gif, .webp, .tiff, .ppm
    2. The size of the image should be less than 5M!
    3. The image length and width must be greater than or equal 200 pixels and smaller than or equal to 1024pixes.

Uploading File