Jewelry Display
Other Displays
ODIS-WH0038-09

  • Add to Wish List

    • Color:

    • Package Size:

    • Specification:
      • 【Enlarged Base Holder】: The package includes two action figure stands. The enlarged and widened base design makes this display frame more stable and not easy to topple than the common display frame base. The bracket is designed with two claws, which is suitable for most styles and models.
      • 【Size Display】: The size after assembly is about 5.9x3.9x4.3 inches/15x10x11cm; The base size is about 5.9x3.9x0.15 inches/15x10x0.35cm; The length of the support rod is about 4.3 inches/11 cm. The support rod is connected to the base and the angle can be adjusted.
      • 【Solid and Thick】: These action supports are made of high-quality acrylic materials, which are solid and durable; The interface is tightly connected, easy to assemble and replace, and can be used for a long time. The base is attached with a protective film to prevent transportation wear.
      • 【Easy to Assemble】: This display bracket is shipped unassembled. We are equipped with matching screws. No glue is needed for assembly, just take down the parts and install them in the corresponding position. Please refer to the picture for detailed installation introduction.
      • 【Applicable to Various Models】: The action figure display stand is very suitable for use with figuerts and other human figure lines. Such as SD, BB, 1/100, 1/144 Gundam, Saint-Cloth characters, etc.

  • Availability:
    IN STOCK

  • 2-3 Working Days

    247(g)

    Ask a Question

    FINGERINSPIRE 2 Pcs Action Figure Stands Clear Doll Model Support Stand with 4x6 inch Base Assembly Action Figure Display Holder Durable Model Display Stand Compatible with 1/144 RG HG Figure Model(ODIS-WH0038-09)

    *Category:

    Please select a category.

    Comments:

    Please input your request.

    I Want Smaller Lots

    FINGERINSPIRE 2 Pcs Action Figure Stands Clear Doll Model Support Stand with 4x6 inch Base Assembly Action Figure Display Holder Durable Model Display Stand Compatible with 1/144 RG HG Figure Model(ODIS-WH0038-09)

    Original Packing

    • QTY : Package
    • Package Size : Sets/package
    Sets

    Invalid Input

    I Want Mixed Products

    FINGERINSPIRE 2 Pcs Action Figure Stands Clear Doll Model Support Stand with 4x6 inch Base Assembly Action Figure Display Holder Durable Model Display Stand Compatible with 1/144 RG HG Figure Model(ODIS-WH0038-09)

    Comments: Please input your mixed request.

    • Item Code: Please input the item code.

      Comments: Please input your mixed request.

    + Add Mixed Products

  • Promotion:
    Coupon: US $53.00 for NEW Client. Register Now >>
    Member Discounts Up to 20% OFF
    • Bronze Price: US $10.47 3%off
    • Silver Price: US $10.14 6%off
    • Gold Price: US $9.82 9%off
    • Platinum Price: US $9.50 12%off
    • Diamond Price: US $9.17 15%off
    • Super Price: US $8.63 20%off
Add to Cart Buy Now

Plastic Model Assembled Action Figure Display Holders, Doll Model Support Stands, with Iron Findings and Rectangle Base, Clear

Size: about finished product: 10cm in diameter, 11cm high,

pole: 1.1cm wide, 11cm long, 1cm thick, hole: 0.3cm and 0.5cm, 1pcs;

link: 4.7cm wide, 6.3cm long, 1cm thick, Findings: 1.4~2.8x0.9~2.3x0.3~1cm, hole: 0.3cm, 1pcs;

screw: 0.4cm in diameter, 0.95cm long, pin: 0.2cm, 4pcs;

nut: 0.55cm wide, 0.5cm long, 0.2cm thick, hole: 0.2cm, 4pcs;

Rectangle board: 10cm wide, 15cm long, 0.35cm thick, hole: 0.45cm, 1pcs.

Priced per 2 Sets

Please Note: Slight deviations in colors is allowed due to different display device.

Featured Reviews

Customer Questions

Confirm

Confirm Cancel
close

Please Note

OK
Country/Region:

Search by Image

·Search pandahall with an image instead of text. Try dragging an image here.

  • 1. The image must be in one of the following formats: .jpg, .png, .jpeg, .bmp, .gif, .webp, .tiff, .ppm
    2. The size of the image should be less than 5M!
    3. The image length and width must be greater than or equal 200 pixels and smaller than or equal to 1024pixes.
  • 1. The image must be in one of the following formats: .jpg, .png, .jpeg, .bmp, .gif, .webp, .tiff, .ppm
    2. The size of the image should be less than 5M!
    3. The image length and width must be greater than or equal 200 pixels and smaller than or equal to 1024pixes.

Uploading File